Cartridge/Filter 60926, Multi Gas/Vapor/P100

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. Use in a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. When properly fitted, helps provide respiratory protection from certain organic vapors and particulates, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.

Usually ships within 1 to 2 business days.

Item No. 10067052

Quantity	Price
1 - 5	$20.85 (PR)
6 - 11	$20.05 (PR)
12 +	$19.25 (PR)

Enter Quantity

More Information

*3M recommended for relief against nuisance levels of organic vapors. Nuisance-level organic vapor refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.
**3M recommended for relief against nuisance levels of acid gases. Nuisance-level acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiration protection against acid gas.
***3M recommended for ozone protection up to 10 x OSHA PEL (Not NIOSH certified for use against ozone).

This cartridge helps protect against certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see package instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

Important: Before using these respirators, you must determine the following:
1. If there is sufficient oxygen present.
2. The type of contaminant(s) for which the respirator is being selected.
3. The concentration level of contaminant(s).
4. Whether the respirator can be properly fitted on the wearer's face. All respirator instructions, warnings and use and time limitations must also be read and understood by the wearer before use.

Before use of these respirators, a written respiratory protection program must be implemented, meeting all the re-quirements of OSHA 29 CFR 1910.134, including training, fit testing and medical evaluation.